The DOGENDORF Acrylic Frames makes the production of high-quality, precise and durable silicon moulds possible. On one side of the Acrylic Frame there is the DOGENDORF Codifying Field so that the future silicon moulds can be used with a set of Codifying Field parameters.
The production of silicon moulds with the DOGENDORF Codifying Field:
To enable the easy placing of the model the upper tray can be removed at the beginning.
On the bottom of the Acrylic Frame there are three holes alongside each other which are meant to be used for the positioning of the cone. Because the Acrylic Frame allows three different diameters of silicon moulds the position of the cone is decided regarding the character of the model. It is set on the cone and the side panel is assembled.
Ideally the liquid silicon is filled in the Acrylic Frame through a mixing unit.
The upper tray is placed on top the Acrylic Frame, by which the future silicoe mould gets it exact size and shape, and that the surplus material can escape through a leave-out in the upper tray. Depending on the silicone curing method the silicon mould can be removed and cut open after the dedicated time.
The Acrylic Frames are available in the following inner dimensions:
- 65 x 50
- 75 x 60
- 85 x 70
- 110 x 90 and
- 120 x 100 mm
* Silicon can be ordered on request